A bathroom floor takes water, foot traffic, and the small movements every house makes as it settles. We set bathroom floor tile over an uncoupling membrane (Ditra) so that movement does not telegraph up and crack your grout lines. Porcelain, ceramic, or natural stone, in hexagon, square, or large-format, cut clean around the toilet flange and the vanity.
If you want warm floors for a Bellingham winter, we install an electric radiant heat mat under the tile while the floor is open. It adds roughly $700 to $1,800 to a typical bathroom, and it is a lot easier to do now than to retrofit later. Either way you get a written quote before we start.
What it actually costs.
Bathroom floor tile $1,400 to $4,500
Floor sizeA small half-bath vs. a full primary bathroom
Tile choiceStandard porcelain vs. stone and small-format mosaic
MembraneUncoupling membrane under the tile on every floor
HeatOptional electric radiant mat adds about $700 to $1,800
Our four-step process.
Walkthrough and written quote
We measure the floor, talk tile and whether you want heat, and write a line-item quote.
Prep and membrane
We check the subfloor, fix soft spots, and set an uncoupling membrane (and the heat mat if you want it).
Set tile and grout
We dry-lay the layout, set the tile with the right mortar, and grout once it has cured.
Seal and final walkthrough
We seal the grout and any stone, clean up, and walk the floor with you.
Why hire pros for bathroom floor tile.
Uncoupling membrane under every floor so grout does not crack
Porcelain, ceramic, or natural stone in the layout you want
Optional electric radiant heat for warm winter mornings
Clean cuts around the toilet, vanity, and door casings
Written line-item quote, no surprise add-ons
Frequently asked questions.
How much does bathroom floor tile cost in Bellingham?
A typical Bellingham bathroom floor runs $1,400 to $4,500 installed, depending on the size of the room and the tile you pick. Add roughly $700 to $1,800 if you want an electric heated mat under the tile. The range includes an uncoupling membrane, which is what keeps the grout from cracking as the house moves.
Do heated tile floors work in the Pacific Northwest?
Yes, and they make a real difference in a Bellingham winter. An electric radiant mat goes under the tile and warms the floor on a thermostat or timer. It is most worth doing during a re-tile, while the floor is already open, because retrofitting heat later means pulling the floor back up. We size the mat to the room and the tile.
Is porcelain or ceramic better for a bathroom floor?
Porcelain is the better pick for most Bellingham bathroom floors. It is denser, absorbs less water, and stands up to traffic better than standard ceramic, which matters in a wet room. Ceramic is fine for walls and lighter-use floors and usually costs a bit less. We will tell you which makes sense for your room and budget.
Ready for a free bathroom floor tile quote?
Tell us about your project and we'll reply within 15 minutes during business hours.
Every neighborhood we serve has its own homes and its own quirks, from older bathrooms in Fairhaven to hillside floors in Sudden Valley. Pick your area for local notes: